Artigos
URI permanente para esta coleçãohttps://locus.ufv.br/handle/123456789/11800
Navegar
5 resultados
Resultados da Pesquisa
Item Synthesis and application of sugarcane bagasse cellulose mixed esters. Part I: Removal of Co2+ and Ni2+ from single spiked aqueous solutions in batch mode using sugarcane bagasse cellulose succinate phthalate(Journal of Colloid and Interface Science, 2019-01-01) Silva, Luis Henrique Mendes da; Elias, Megg Madonyk Cota; Ferreira, Gabriel Max Dias; Almeida, Francine Tatiane Rezende de; Rosa, Nathália Cristina Martins; Silva, Isabela Almeida; Filgueiras, Jefferson Gonçalves; Azevedo, Eduardo Ribeiro de; Melo, Tânia Márcia Sacramento; Gil, Laurent Frédéric; Gurgel, Leandro Vinícius AlvesSugarcane bagasse cellulose mixed ester succinate phthalate (SBSPh) was synthesized by a novel one-pot reaction method. The effects of temperature, time and mole fraction of succinic anhydride (χSA) on the responses weight gain (wg), number of carboxylic acid groups (nT,COOH), and adsorption capacity (q) of Co2+ and Ni2+ were evaluated by a 23 experimental design. The chemical structure of the material was elucidated by Fourier transform infrared, 13C Multiple Cross-Polarization solid-state NMR spectroscopy and 1H NMR relaxometry. The best SBSPh synthesis condition (100 °C, 11 h, χSA of 0.2) yielded a wg of 59.1%, nT,COOH of 3.41 mmol g−1, and values of qCo2+ and qNi2+ of 0.348 and 0.346 mmol g−1, respectively. The Sips model fitted better the equilibrium data, and the maximum adsorption capacities (pH 5.75 and 25 °C) estimated by this model were 0.62 and 0.53 mmol g−1 for Co2+ and Ni2+, respectively. The ΔadsH° values estimated by isothermal titration calorimetry were 8.43 and 7.79 kJ mol−1 for Co2+ and Ni2+, respectively. Desorption and re-adsorption efficiencies were evaluated by a 22 experimental design, which showed that SBSPh adsorbent can be recovered and reused without significant loss of adsorption capacity.Item Synthesis and application of a new carboxylated cellulose derivative. Part I: Removal of Co2+, Cu2+ and Ni2+ from monocomponent spiked aqueous solution(Journal of Colloid and Interface Science, 2016-12) Ferreira, Gabriel Max Dias; Silva, Luis Henrique Mendes da; Teodoro, Filipe Simões; Ramos, Stela Nhandeyara do Carmo; Elias, Megg Madonyk Cota; Mageste, Aparecida Barbosa; Gil, Laurent Frédéric; Gurgel, Leandro Vinícius AlvesA new carboxylated cellulose derivative (CTA) was prepared from the esterification of cellulose with 1,2,4-Benzenetricarboxylic anhydride. CTA was characterized by percent weight gain (pwg), amount of carboxylic acid groups (nCOOH), elemental analysis, FTIR, TGA, solid-state 13C NMR, X-ray diffraction (DRX), specific surface area, pore size distribution, SEM and EDX. The best CTA synthesis condition yielded a pwg and nCOOH of 94.5% and 6.81 mmol g−1, respectively. CTA was used as an adsorbent material to remove Co2+, Cu2+ and Ni2+ from monocomponent spiked aqueous solution. Adsorption studies were developed as a function of the solution pH, contact time and initial adsorbate concentration. Langmuir model better fitted the experimental adsorption data and the maximum adsorption capacities estimated by this model were 0.749, 1.487 and 1.001 mmol g−1 for Co2+, Cu2+ and Ni2+, respectively. The adsorption mechanism was investigated by using isothermal titration calorimetry. The values of ΔadsH° were in the range from 5.36 to 8.09 kJ mol−1, suggesting that the mechanism controlling the phenomenon is physisorption. Desorption and re-adsorption studies were also performed. Desorption and re-adsorption efficiencies were closer to 100%, allowing the recovery of both metal ions and CTA adsorbent.Item Trimellitated sugarcane bagasse: A versatile adsorbent for removal of cationic dyes from aqueous solution. Part I: Batch adsorption in a monocomponent system(Journal of Colloid and Interface Science, 2018-01-06) Fideles, Renata Aparecida; Ferreira, Gabriel Max Dias; Teodoro, Filipe Simões; Adarme, Oscar Fernando Herrera; Silva, Luis Henrique Mendes da; Gil, Laurent Frédéric; Gurgel, Leandro Vinícius AlvesTrimellitated-sugarcane bagasse (STA) was used as an environmentally friendly adsorbent for removal of the basic dyes auramine-O (AO) and safranin-T (ST) from aqueous solutions at pH 4.5 and 7.0. Dye adsorption was evaluated as a function of STA dosage, agitation speed, solution pH, contact time, and initial dye concentration. Pseudo-first- and pseudo-second-order, Elovich, intraparticle diffusion, and Boyd models were used to model adsorption kinetics. Langmuir, Dubinin-Radushkevich, Redlich-Peterson, Sips, Hill-de Boer, and Fowler-Guggenheim models were used to model adsorption isotherms, while a Scatchard plot was used to evaluate the existence of different adsorption sites. Maximum adsorption capacities for removal of AO and ST were 1.005 and 0.638 mmol g−1 at pH 4.5, and 1.734 and 1.230 mmol g−1 at pH 7.0, respectively. Adsorption enthalpy changes obtained by isothermal titration calorimetry (ITC) ranged from −21.07 ± 0.25 to −7.19 ± 0.05 kJ mol−1, indicating that both dyes interacted with STA by physisorption. Dye desorption efficiencies ranged from 41 to 51%, and re-adsorption efficiencies ranged from 66 to 87%, showing that STA can be reused in new adsorption cycles. ITC data combined with isotherm studies allowed clarification of adsorption interactions.Item Synthesis and application of a new carboxylated cellulose derivative. Part III: Removal of auramine-O and safranin-T from mono- and bi-component spiked aqueous solutions(Journal of Colloid and Interface Science, 2017-10-25) Teodoro, Filipe Simões; Elias, Megg Madonyk Cota; Ferreira, Gabriel Max Dias; Adarme, Oscar Fernando Herrera; Savedra, Ranylson Marcello Leal; Siqueira, Melissa Fabíola; Silva, Luis Henrique Mendes da; Gil, Laurent Frédéric; Gurgel, Leandro Vinícius AlvesIn the third part of this series of studies, the adsorption of the basic textile dyes auramine-O (AO) and safranin-T (ST) on a carboxylated cellulose derivative (CTA) were evaluated in mono- and bi-component spiked aqueous solutions. Adsorption studies were developed as a function of solution pH, contact time, and initial dye concentration. Adsorption kinetic data were modeled by monocomponent kinetic models of pseudo-first- (PFO), pseudo-second-order (PSO), intraparticle diffusion, and Boyd, while the competitive kinetic model of Corsel was used to model bicomponent kinetic data. Monocomponent adsorption equilibrium data were modeled by the Langmuir, Sips, Fowler-Guggenhein, Hill de-Boer, and Konda models, while the IAST and RAST models were used to model bicomponent equilibrium data. Monocomponent maximum adsorption capacities for AO and ST at pH 4.5 were 2.841 and 3.691 mmol g−1, and at pH 7.0 were 5.443 and 4.074 mmol g−1, respectively. Bicomponent maximum adsorption capacities for AO and ST at pH 7.0 were 1.230 and 3.728 mmol g−1. Adsorption enthalpy changes (ΔadsH) were obtained using isothermal titration calorimetry. The values of ΔadsH ranged from −18.83 to −5.60 kJ mol−1, suggesting that physisorption controlled the adsorption process. Desorption and re-adsorption of CTA was also evaluated.Item Regular article synthesis and application of a new carboxylated cellulose derivative. Part I: Removal of Co 2+ , Cu 2+ and Ni 2+ from monocomponent spiked aqueous solution(Journal of Colloid and Interface Science, 2016-08-02) Ferreira, Gabriel Max Dias; Teodoro, Filipe Simões; Ramos, Stela Nhandeyara do Carmo; Elias, Megg Madonyk Cota; Mageste, Aparecida Barbosa; Silva, Luis Henrique Mendes da; Gil, Laurent Frédéric; Gurgel, Leandro Vinícius AlvesA new carboxylated cellulose derivative (CTA) was prepared from the esterification of cellulose with 1,2,4- Benzenetricarboxylic anhydride. CTA was characterized by percent weight gain (pwg), amount of carboxylic acid groups (nCOOH), elemental analysis, FTIR, TGA, solid-state ^13C NMR, X-ray diffraction (DRX), specific surface area, pore size distribution, SEM and EDX. The best CTA synthesis condition yielded a pwg and nCOOH of 94.5% and 6.81 mmol g^−1, respectively. CTA was used as an adsorbent material to remove Co^2+, Cu^2+ and Ni^2+ from monocomponent spiked aqueous solution. Adsorption studies were developed as a function of the solution pH, contact time and initial adsorbate concentration. Langmuir model better fitted the experimental adsorption data and the maximum adsorption capacities estimated by this model were 0.749, 1.487 and 1.001 mmol g−1 for Co^2+, Cu^2+ and Ni^2+, respectively. The adsorption mechanism was investigated by using isothermal titration calorimetry. The values of ΔadsH° were in the range from 5.36 to 8.09 kJ mol^−1, suggesting that the mechanism controlling the phenomenon is physisorption. Desorption and re-adsorption studies were also performed. Desorption and re-adsorption efficiencies were closer to 100%, allowing the recovery of both metal ions and CTA adsorbent.