Química

URI permanente desta comunidadehttps://locus.ufv.br/handle/123456789/11782

Navegar

Agora exibindo 1 - 6 de 6

Adsorption of the herbicides diquat and difenzoquat on polyurethane foam: kinetic, equilibrium and computational studies
(Ecotoxicology and Environmental Safety, 2017-08-09) Vinhal, Jonas O.; Nege, Kassem K.; Lage, Mateus R.; Carneiro, José Walkimar de M.; Lima, Claudio F.; Cassella, Ricardo J.
This work reports a study about the adsorption of the herbicides diquat and difenzoquat from aqueous medium employing polyurethane foam (PUF) as the adsorbent and sodium dodecylsulfate (SDS) as the counter ion. The adsorption efficiency was shown to be dependent on the concentration of SDS in solution, since the formation of an ion-associate between cationic herbicides (diquat and difenzoquat) and anionic dodecylsulfate is a fundamental step of the process. A computational study was carried out to identify the possible structure of the ion-associates that are formed in solution. They are probably formed by three units of dodecylsulfate bound to one unit of diquat, and two units of dodecylsulfate bound to one unit of difenzoquat. The results obtained also showed that 95% of both herbicides present in 45 mL of a solution containing 5.5 mg L^−1 could be retained by 300 mg of PUF. The experimental data were well adjusted to the Freundlich isotherm (r^2 ≥ 0.95) and to the pseudo-second-order kinetic equation. Also, the application of Morris-Weber and Reichenberg equations indicated that an intraparticle diffusion process is active in the control of adsorption kinetics.
Association of the anti-tuberculosis drug rifampicin with a PAMAM dendrimer
(Journal of Molecular Graphics and Modelling, 2015-05-28) Bellini, Reinaldo G.; Guimarães, Ana P.; Pacheco, Marco A.C.; Dias, Douglas M.; Furtado, Vanessa R.; Alencastro, Ricardo B. de; Horta, Bruno A.C.
The association of the anti-tuberculosis drug rifampicin (RIF) with a 4th-generation poly(amidoamine) (G4-PAMAM) dendrimer was investigated by means of molecular dynamics simulations. The RIF load capacity was estimated to be around 20 RIF per G4-PAMAM at neutral pH. The complex formed by 20 RIF molecules and the dendrimer (RIF20-PAMAM) was subjected to 100 ns molecular dynamics (MD) simulations at two different pH conditions (neutral and acidic). The complex was found to be significantly more stable in the simulation at neutral pH compared to the simulation at low pH in which the RIF molecules were rapidly and almost simultaneously expelled to the solvent bulk. The high stability of the RIF-PAMAM complex under physiological pH and the rapid release of RIF molecules under acidic medium provide an interesting switch for drug targeting since the Mycobacterium resides within acidic domains of the macrophage. Altogether, these results suggest that, at least in terms of stability and pH-dependent release, PAMAM-like dendrimers may be considered suitable drug delivery systems for RIF and derivatives.
Centrosymmetric resonance-assisted intermolecular hydrogen bonding chains in the enol form of ␤-diketone: Crystal structure and theoretical study
(Journal of Molecular Graphics and Modelling, 2016-06-09) Franca, Eduardo F.; Guilardi, Silvana; Paixão, Drielly A.; Teixeira, Róbson R.; Pereira, Wagner L.; Ellena, Javier A.
Isobenzofuran-1(3H)-ones (phtalides) are heterocycles that present a benzene ring fused to a γ-lactone functionality. This structural motif is found in several natural and synthetic compounds that present relevant biological activities. In the present investigation, the 3-(2-hydroxy-4,4-dimethyl-6-oxocyclohexen-1-yl)isobenzofuran-1(3H)-one was characterized by single-crystal X-ray analysis. In the crystal structure, there are two molecules per asymmetric unit. One of them exhibits resonance assisted hydrogen bonds (RAHBs). Semi-empirical and DFT calculations were performed to obtain electronic structure and π-delocalization parameters, in order to better understand the energy stabilization of RAHBs in the crystal packing of the studied molecule. The structural parameters showed good agreement between theoretical and experimental data. The theoretical investigation revealed that the RAHBs stabilization energy is directly related to the electronic delocalization of the enol form fragment. In addition, RAHBs significantly affected the HOMO and charge distribution around the conjugated system.
Polyurethane foam loaded with sodium dodecylsulfate for the extraction of 'quat' pesticides from aqueous medium: optimization of loading conditions
(Ecotoxicology and Environmental Safety, 2016-05-20) Vinhal, Jonas O.; Lima, Claudio F.; Cassella, Ricardo J.
The cationic herbicides paraquat, diquat and difenzoquat are largely used in different cultures worldwide. With this, there is an intrinsic risk of environmental contamination when these herbicides achieve natural waters. The goal of this work was to propose a novel and low-cost sorbent for the removal of the cited herbicides from aqueous medium. The proposed sorbent was prepared by loading polyurethane foam with sodium dodecylsulfate. The influence of several parameters (SDS concentration, HCl concentration and shaking time) on the loading process was investigated. The results obtained in this work demonstrated that all studied variables influenced the loading process, having significant effect on the extraction efficiency of the resulted PUF-SDS. At optimized conditions, the PUF was loaded by shaking 200 mg of crushed foam with 200 mL of a solution containing 5.0×10^−3 mol L^−1 SDS and 0.25 mol L^−1 HCl, for 30 min. The obtained PUF-SDS was efficient for removing the three herbicides from aqueous medium, achieving extraction percentages higher than 90%. The sorption process followed a pseudo second-order kinetics, which presented excellent predictive capacity of the amount of herbicide retained with time.
Synthesis and application of a new carboxylated cellulose derivative. Part III: Removal of auramine-O and safranin-T from mono- and bi-component spiked aqueous solutions
(Journal of Colloid and Interface Science, 2017-10-25) Teodoro, Filipe Simões; Elias, Megg Madonyk Cota; Ferreira, Gabriel Max Dias; Adarme, Oscar Fernando Herrera; Savedra, Ranylson Marcello Leal; Siqueira, Melissa Fabíola; Silva, Luis Henrique Mendes da; Gil, Laurent Frédéric; Gurgel, Leandro Vinícius Alves
In the third part of this series of studies, the adsorption of the basic textile dyes auramine-O (AO) and safranin-T (ST) on a carboxylated cellulose derivative (CTA) were evaluated in mono- and bi-component spiked aqueous solutions. Adsorption studies were developed as a function of solution pH, contact time, and initial dye concentration. Adsorption kinetic data were modeled by monocomponent kinetic models of pseudo-first- (PFO), pseudo-second-order (PSO), intraparticle diffusion, and Boyd, while the competitive kinetic model of Corsel was used to model bicomponent kinetic data. Monocomponent adsorption equilibrium data were modeled by the Langmuir, Sips, Fowler-Guggenhein, Hill de-Boer, and Konda models, while the IAST and RAST models were used to model bicomponent equilibrium data. Monocomponent maximum adsorption capacities for AO and ST at pH 4.5 were 2.841 and 3.691 mmol g−1, and at pH 7.0 were 5.443 and 4.074 mmol g−1, respectively. Bicomponent maximum adsorption capacities for AO and ST at pH 7.0 were 1.230 and 3.728 mmol g−1. Adsorption enthalpy changes (ΔadsH) were obtained using isothermal titration calorimetry. The values of ΔadsH ranged from −18.83 to −5.60 kJ mol−1, suggesting that physisorption controlled the adsorption process. Desorption and re-adsorption of CTA was also evaluated.
Trimellitated sugarcane bagasse: A versatile adsorbent for removal of cationic dyes from aqueous solution. Part I: Batch adsorption in a monocomponent system
(Journal of Colloid and Interface Science, 2018-01-06) Fideles, Renata Aparecida; Ferreira, Gabriel Max Dias; Teodoro, Filipe Simões; Adarme, Oscar Fernando Herrera; Silva, Luis Henrique Mendes da; Gil, Laurent Frédéric; Gurgel, Leandro Vinícius Alves
Trimellitated-sugarcane bagasse (STA) was used as an environmentally friendly adsorbent for removal of the basic dyes auramine-O (AO) and safranin-T (ST) from aqueous solutions at pH 4.5 and 7.0. Dye adsorption was evaluated as a function of STA dosage, agitation speed, solution pH, contact time, and initial dye concentration. Pseudo-first- and pseudo-second-order, Elovich, intraparticle diffusion, and Boyd models were used to model adsorption kinetics. Langmuir, Dubinin-Radushkevich, Redlich-Peterson, Sips, Hill-de Boer, and Fowler-Guggenheim models were used to model adsorption isotherms, while a Scatchard plot was used to evaluate the existence of different adsorption sites. Maximum adsorption capacities for removal of AO and ST were 1.005 and 0.638 mmol g−1 at pH 4.5, and 1.734 and 1.230 mmol g−1 at pH 7.0, respectively. Adsorption enthalpy changes obtained by isothermal titration calorimetry (ITC) ranged from −21.07 ± 0.25 to −7.19 ± 0.05 kJ mol−1, indicating that both dyes interacted with STA by physisorption. Dye desorption efficiencies ranged from 41 to 51%, and re-adsorption efficiencies ranged from 66 to 87%, showing that STA can be reused in new adsorption cycles. ITC data combined with isotherm studies allowed clarification of adsorption interactions.